1.0    ' file format version
' GKD-xRCI english master file text messages for translation
' A single quote ' denotes comment text and cannot be
' used in a message. Messages are identified by the
' message name (do not alter!) and can be in any order,
' or omitted to default to english.
' View and edit this plain text file using Notepad
' with Courier New font and save it with Unicode encoding.
' On the indicator the font is tahoma and WinCE characters
' are a subset that includes Latin accented and Cyrillic
' characters. 'Asian' characters will show on your windows
' desktop but are not available on the indicator.
' If your translation is longer it may not fit
' and will be visually truncated (often on the right).
' Preserve the case pattern. Use true spaces, not the tab key.

' Language and version in this file
                                                                                '*** dsLanguage           ""
' Front screen messages
LEVEL                                                                           '*** dsLEVEL              "LEVEL"
Gradient                                                                        '*** dsGradient           "Gradient"
Boom Offset-Capacity Reduced                                                    '*** dsBoomOffset         "Boom Offset-Capacity Reduced"
Travel-Capacity Reduced                                                         '*** dsTravel             "Travel-Capacity Reduced"
Tandem                                                                          '*** dsTandem             "Tandem"
Capacity                                                                        '*** dsCapacity           "Capacity"
LIM                                                                             '*** dsLIM                "LIM"
LOAD                                                                            '*** dsLOAD               "LOAD"
Cant                                                                            '*** dsCant               "Cant"
SWL                                                                             '*** dsSWL                "SWL"
OK                                                                              '*** dsOK                 "OK"
OK                                                                              '*** dsOK_English         "OK"
IN/OUT                                                                          '*** dsINOUT              "IN/OUT"
LOW                                                                             '*** dsLOW                "LOW"
HIGH                                                                            '*** dsHIGH               "HIGH"
>|IN|<                                                                          '*** dsWallIN             ">|IN|<"
|<OUT>|                                                                         '*** dsWallOUT            "|<OUT>|"
|<WALL>|                                                                        '*** dsWallWALL           "|<WALL>|"
Height                                                                          '*** dsHeight             "Height"
In                                                                              '*** dsIn                 "In"
SLEW LEFT                                                                       '*** dsSLEWLEFT           "SLEW LEFT"
SLEW RIGHT                                                                      '*** dsSLEWRIGHT          "SLEW RIGHT"
UNSTABLE                                                                        '*** dsUNSTABLE           "UNSTABLE"
BP                                                                              '*** dsBP                 "BP"
ALP1                                                                            '*** dsALP1               "ALP1"
ALP2                                                                            '*** dsALP2               "ALP2"
QH                                                                              '*** dsQH                 "QH"
JIBLP                                                                           '*** dsJIBLP              " JIBLP"
OVER-                                                                           '*** dsOver               "OVER-"
RIDE                                                                            '*** dsRide               "RIDE"
RIDDEN                                                                          '*** dsRidden             "RIDDEN"
LOGGING DIG MODE                                                                '*** dsLoggingDigMode     "LOGGING DIG MODE"
' mode screen messages
Exit                                                                            '*** dsExit               "Exit"
Exit                                                                            '*** dsExit_English       "Exit"
Service                                                                         '*** dsService            "Service"
Slew Angle is OFF                                                               '*** dsSlewAngleOFF       "Slew Angle is OFF"
Virtual Wall                                                                    '*** dsVirtualWall        "Virtual Wall"
Height Limit is OFF                                                             '*** dsHeightLimitOFF     "Height Limit is OFF"
Bucket Release                                                                  '*** dsBucketRelease      "Bucket Release"
Alarm Test                                                                      '*** dsAlarmTest          "Alarm Test"
Dig Road Only                                                                   '*** dsDigRoadOnly        "Dig Road Only"
Dig Depth                                                                       '*** dsDigDepth           "Dig Depth"
RESTRICTIONS                                                                    '*** dsRESTRICTIONS       "RESTRICTIONS "
Height Limit Unavailable                                                        '*** dsHeightLimitUnavailable "Height Limit Unavailable"
Wall Limit Unavailable                                                          '*** dsWallLimitUnavailable "Wall Limit Unavailable"
as swivel off centre                                                            '*** dsSwivelOff          "as swivel off centre"
Offset                                                                          '*** dsOffsetB            "Offset"
Tandem is OFF                                                                   '*** dsTandemOFF          "Tandem is OFF"
STATUS                                                                          '*** dsSTATUS             "STATUS "
Fore                                                                            '*** dsForeBoom           "Fore"
Slew                                                                            '*** dsSlew               "Slew"
Fast                                                                            '*** dsFast               "Fast"
Right                                                                           '*** dsRight              "Right"
Height Limit                                                                    '*** dsHeightLimit        "Height Limit"
Left                                                                            '*** dsLeft               "Left"
Slew Limit                                                                      '*** dsSlewLimit          "Slew Limit"
RS Pressure                                                                     '*** dsRSPressure         "RS Pressure"
Stub                                                                            '*** dsStubBoom           "Stub"
Grad                                                                            '*** dsGrad               "Grad"
Dipper                                                                          '*** dsDipper             "Dipper"
FS Pressure                                                                     '*** dsFSPressure         "FS Pressure"
MORE                                                                            '*** dsMORE               "MORE "
Error Analysis                                                                  '*** dsErrorAnalysis      "Error Analysis"
Test                                                                            '*** dsTest               "Test"
RGIS                                                                            '*** dsRGIS               "RGIS"
Outputs                                                                         '*** dsOutputs            "Outputs"
Rail Gear Status                                                                '*** dsRailGearStatus     "Rail Gear Status"
Inputs                                                                          '*** dsInputs             "Inputs"
Rear/Fixed:                                                                     '*** dsRearFixed          "Rear/Fixed:"
Front/Pivot:                                                                    '*** dsFrontPivot         "Front/Pivot:"
Lift is ON                                                                      '*** dsLiftON             "Lift is ON"
Slew Limit Unavailable                                                          '*** dsSlewLimitUnavailable "Slew Limit Unavailable"
MODE SETTING - SOFTWARE VERSION                                                 '*** dsMODESETTING        "MODE SETTING - SOFTWARE VERSION"
Height Limit is ON                                                              '*** dsHeightLimitON      "Height Limit is ON"
Releasing Bucket                                                                '*** dsBucketReleasing    "Releasing Bucket"
Ext                                                                             '*** dsExt                "Ext"
Ret                                                                             '*** dsRet                " Ret"
Offset                                                                          '*** dsOffset             "Offset"
Telejib                                                                         '*** dsTelejib            "Telejib"
Jib                                                                             '*** dsJib                "Jib"
Swivel                                                                          '*** dsSwivel             "Swivel"
Lift                                                                            '*** dsLift               "Lift"
Lower                                                                           '*** dsLower              "Lower"
Up                                                                              '*** dsUp                 "Up"
Down                                                                            '*** dsDown               "Down"
Gear allow                                                                      '*** dsGearallow          "Gear allow"
Off                                                                             '*** dsOff                "Off"
Slew Angle is ON                                                                '*** dsSlewAngleON        "Slew Angle is ON"
Virtual Walls ON                                                                '*** dsVirtualWallsON     "Virtual Walls ON"
Left Wall ON                                                                    '*** dsLeftWallON         "Left Wall ON"
Right Wall ON                                                                   '*** dsRightWallON        "Right Wall ON"
Both Walls ON                                                                   '*** dsBothWallsON        "Both Walls ON"
Virtual Walls OFF                                                               '*** dsVirtualWallsOFF    "Virtual Walls OFF"
Tandem is ON                                                                    '*** dsTandemON           "Tandem is ON"
RELEASE                                                                         '*** dsTandemRelease      "RELEASE"
No brakes!                                                                      '*** dsNobrakes           "No brakes!"
Blue Light On                                                                   '*** dsBlueLightOn        "Blue Light On"
Blue Light Off                                                                  '*** dsBlueLightOff       "Blue Light Off"
Red Light On                                                                    '*** dsRedLightOn         "Red Light On"
Red Light Off                                                                   '*** dsRedLightOff        "Red Light Off"
White Light On                                                                  '*** dsWhiteLightOn       "White Light On"
White Light Off                                                                 '*** dsWhiteLightOff      "White Light Off"
Tipping Alarm On                                                                '*** dsTippingAlarmOn     "Tipping Alarm On"
Tipping Alarm Off                                                               '*** dsTippingAlarmOff    "Tipping Alarm Off"
Breakaway On                                                                    '*** dsBreakawayOn        "Breakaway On"
Breakaway Off                                                                   '*** dsBreakawayOff       "Breakaway Off"
Amber LED On                                                                    '*** dsAmberLEDOn         "Amber LED On"
Amber LED Off                                                                   '*** dsAmberLEDOff        "Amber LED Off"
Red LED On                                                                      '*** dsRedLEDOn           "Red LED On"
Red LED Off                                                                     '*** dsRedLEDOff          "Red LED Off"
Dig Rail Mode                                                                   '*** dsDigRailMode        "Dig Rail Mode"
Dig is OFF                                                                      '*** dsDigOFF             "Dig is OFF"
Short                                                                           '*** dsShort              "Short"
Long                                                                            '*** dsLong               "Long"
Select Limits                                                                   '*** dsSelectLimits       "Select Limits"
Cab Protection Limit                                                            '*** dsCabProtectionLimit "Cab Protection Limit"
' brightness screen
Brightness                                                                      '*** dsBrightness         "Brightness"
DAY                                                                             '*** dsDAY                "DAY"
NIGHT                                                                           '*** dsNIGHT              "NIGHT"
Enable Automatic Brightness                                                     '*** dsEnableAutomaticBrightness "Enable Automatic Brightness"
' slew verification screen
Slew Verification                                                               '*** dsSlewVerification   "Slew Verification"
Slew limits will be exceeded.                                                   '*** dsSlewLimitsWillBeExceeded "Slew limits will be exceeded."
Please reposition the machine and retry                                         '*** dsPleaseRepositionMachineAndRety "Please reposition the machine and retry"
Select direction to slew from datum at x°                                       '*** dsSelectDirectionToSlew "Select direction to slew from datum at x°"
(Ensure direction is clear and arm retracted)                                   '*** dsEnsureDirectionIsClear "(Ensure direction is clear and arm retracted)"
Slew left just past datum at x° and STOP                                        '*** dsSlewLeftPastDatumPoint "Slew left just past datum at x° and STOP"
Slew right just past datum at x° and STOP                                       '*** dsSlewRightPastDatumPoint "Slew right just past datum at x° and STOP"
Slew to x° and STOP                                                             '*** dsSlewToX            "Slew to x° and STOP"
Verification failed. Repeat?                                                    '*** dsFailedRepeat       "Verification failed. Repeat?"
Verification passed. Confirm pass?                                              '*** dsPassedConfirmPass  "Verification passed. Confirm pass?"
Seconds                                                                         '*** dsSeconds            "Seconds"
Yes                                                                             '*** dsLowerYes           "Yes"
No                                                                              '*** dsLowerNo            "No"
Confirm                                                                         '*** dsConfirm            "Confirm"
Reject                                                                          '*** dsReject             "Reject"
Next                                                                            '*** dsNext               "Next"
Failed                                                                          '*** dsFailed             "Failed"
Passed                                                                          '*** dsPassed             "Passed"
Slew Verification Deferred by Operator                                          '*** dsDeferred           "Slew Verification Deferred by Operator"
This Can Only Be Done                                                           '*** dsDeferredInfo       "This Can Only Be Done "
More Times                                                                      '*** dsDeferredInfo2      " More Times"
Slew Verification Cannot be Deferred                                            '*** dsCannotDefer        "Slew Verification Cannot be Deferred"
Move The Machine To A Safe Place And Complete The Process                       '*** dsCannotDeferInfo    "Move The Machine To A Safe Place And Complete The Process"
' PWS messages
Driver's tag missing                                                            '*** dsDriversTagMissing  "Driver's tag missing"
Too many tags in zone at start-up                                               '*** dsTooManyTagsInZoneAtStartup "Too many tags in zone at start-up"
Driver's tag not acknowledged                                                   '*** dsDriversTagNotAcknowledged "Driver's tag not acknowledged"
Driver's tag acknowledged                                                       '*** dsDriversTagAcknowledged "Driver's tag acknowledged"
Proximity Alert                                                                 '*** dsProximityAlertWarning "Proximity Alert"
Total Incursions                                                                '*** dsTotalIncursions    "Total Incursions"
Unacknowledged Incursions                                                       '*** dsUnacknowledgedIncursions "Unacknowledged Incursions"
' Logon
CE                                                                              '*** dsCE                 "CE"
CE                                                                              '*** dsCE_English         "CE"
KEYPAD                                                                          '*** dsKEYPAD             "KEYPAD"
KEYPAD                                                                          '*** dsKEYPAD_English     "KEYPAD"
8 digits please, try again                                                      '*** dsPTSnot8            "8 digits please, try again"
Driver Id                                                                       '*** dsDriverId           "Driver Id"
Please enter your 8 digit PTS code                                              '*** dsEPTSCode           "Please enter your 8 digit PTS code"
' Lift Point Menu Screen
LIFT POINT MENU                                                                 '*** dsLiftPointMenu      "LIFT POINT MENU"
Available Lift Points                                                           '*** dsAvailableLiftPoints "Available Lift Points"
' Splash screens
DATA LOGGED                                                                     '*** dsDATALOGGED         "DATA LOGGED"
Paired machine in motion cut.  Move to safe position.  Use paired machine release button only after consultation.'*** dsPairedMachineInMotionCut "Paired machine in motion cut.  Move to safe position.  Use paired machine release button only after consultation."
Unpaired machines with all motions cut. Release with override key after consultation and move to safe position.'*** dsMachineBecameUnpaired "Unpaired machines with all motions cut. Release with override key after consultation and move to safe position."
Paired machine in overload.  All motion cuts are enabled until stability has been restored.'*** dsPairedMachineInOverload "Paired machine in overload.  All motion cuts are enabled until stability has been restored."
Operating the machine at speed will overshoot the set limit. Operate at slow speed. Move back from limits.'*** dsOperateSlow        "Operating the machine at speed will overshoot the set limit. Operate at slow speed. Move back from limits."
ACCEPT                                                                          '*** dsACCEPT             "ACCEPT"
Warning                                                                         '*** dsWarning            "Warning"
Information                                                                     '*** dsInformation        "Information"
Solenoids overridden by Keyswitch.                                              '*** dsSolenoidsOverridden "Solenoids overridden by Keyswitch."
Do not operate this machine to lift loads.                                      '*** dsDoNotOperateThisMachineToLiftLoads "Do not operate this machine to lift loads."
There is no protection against exceeding safe heights or radius.                '*** dsNoProtection       "There is no protection against exceeding safe heights or radius."
No slew limits or virtual wall protection. Axle unlock is manual unprotected.   '*** dsNoSlewLimits       "No slew limits or virtual wall protection. Axle unlock is manual unprotected."
seconds to motion cut                                                           '*** dsSecsToCut          "seconds to motion cut"
The backwards stability protection is overridden by load/bucket position when this icon is shown. Do not remove load, risk of overturning.'*** dsNoBstab            "The backwards stability protection is overridden by load/bucket position when this icon is shown. Do not remove load, risk of overturning."
The safety system is giving different results and motion has been disabled.     '*** dsSafetyDifferent    "The safety system is giving different results and motion has been disabled."
Operation Cancelled: Deployment of 1 stabiliser leg is not allowed!             '*** dsNo1Leg             "Operation Cancelled: Deployment of 1 stabiliser leg is not allowed!"
Operation Cancelled: 2 legs are not adjacent!                                   '*** ds2LegsNoAdj         "Operation Cancelled: 2 legs are not adjacent!"
Loss of stabiliser footing! Redeploy legs.                                      '*** dsStabLoss           "Loss of stabiliser footing! Redeploy legs."
front left                                                                      '*** dsfrontleft          "front left"
front right                                                                     '*** dsfrontright         "front right"
rear left                                                                       '*** dsrearleft           "rear left"
rear right                                                                      '*** dsrearright          "rear right"
The following legs are sensed as deployed:                                      '*** dsLegsFound          "The following legs are sensed as deployed: "
All Stabiliser legs retracted, duty exited                                      '*** dsAllStabLegsUp      "All Stabiliser legs retracted, duty exited"
Fully Extend or Retract the Counterweight                                       '*** dsNoMiddle           "Fully Extend or Retract the Counterweight"
Is the Tandem RF link available?                                                '*** dsTandemRFConnected  "Is the Tandem RF link available?"
Leaving Tandem mode will increase the lifting capacity and make it unsafe for Tandem operation - are you sure?'*** dsLeavingTandem      "Leaving Tandem mode will increase the lifting capacity and make it unsafe for Tandem operation - are you sure?"
Jib is attached without full Safety System so working ALO is not allowed        '*** dsJibOn              "Jib is attached without full Safety System so working ALO is not allowed"
Jib is attached with full safety system, ALO allowed                            '*** dsJibOnSafety        "Jib is attached with full safety system, ALO allowed"
Jib is removed                                                                  '*** dsJibOff             "Jib is removed"
BEYOND LIMIT!                                                                   '*** dsBeyond             "BEYOND LIMIT!"
LOGGING FAILED                                                                  '*** dsDATALOGGINGFAILED  "LOGGING FAILED"
Error with limit set - motion has been disabled                                 '*** dsErrorCuts          "Error with limit set - motion has been disabled"
SYSTEM ERROR!                                                                   '*** dsSystemError        "SYSTEM ERROR!"
MISMATCH ERROR!                                                                 '*** dsMismatchError      "MISMATCH ERROR!"
OVERRIDE                                                                        '*** dsOverride           "OVERRIDE"
SYSTEM FAILURE!                                                                 '*** dsSystemFailure      "SYSTEM FAILURE!"
Safety Relay ON; should be OFF!                                                 '*** dsSafetyRelayFailureOn "Safety Relay ON; should be OFF!"
Safety Relay OFF; should be ON!                                                 '*** dsSafetyRelayFailureOff "Safety Relay OFF; should be ON!"
Rail Bogies Down, Road Axle Now Locked                                          '*** dsConfirmBogiesDownAndLockRoadAxles "Rail Bogies Down, Road Axle Now Locked"
Safety System Error, limit not set                                              '*** dsSafetySystemError  "Safety System Error, limit not set"
Warning! Slew Overspeed detected, slew motions cut!                             '*** dsSlewTooFast        "Warning! Slew Overspeed detected, slew motions cut!"
Remote Kill Switch Activated, Release both joysticks and press the red button on the Keyfob'*** dsRemoteKillSwitchActivated "Remote Kill Switch Activated, Release both joysticks and press the red button on the Keyfob"
Tandem machines are not paired. Lower capacity may apply.                       '*** dsNotPairedWarning   "Tandem machines are not paired. Lower capacity may apply."
' File handling
No file                                                                         '*** dsNofile             "No file"
File upgraded                                                                   '*** dsFileUpgraded       "File upgraded"
to read                                                                         '*** dstoread             "to read"
SD card full, oldest Trace log file removed                                     '*** dsLogfileRemoved     "SD card full, oldest Trace log file removed"
Storage card traces not found                                                   '*** dsNotraces           "Storage card traces not found"
' Dialog Messages
Turn off slew limit, are you sure?                                              '*** dsTurnOffSlew        "Turn off slew limit, are you sure?"
Enter slew limits select Yes                                                    '*** dsEnterSlew          "Enter slew limits select Yes"
CW Limit too large Re Enter                                                     '*** dsCWLarge            "CW Limit too large Re Enter"
CCW Limit too large Re Enter                                                    '*** dsCCWLarge           "CCW Limit too large Re Enter"
Slew >> CLOCKWISE >> limit and Set                                              '*** dsSlewCW             "Slew >> CLOCKWISE >> limit and Set"
Slew << ANTICLOCKWISE << limit and Set                                          '*** dsSlewCCW            "Slew << ANTICLOCKWISE << limit and Set"
Turn off height limit, are you sure?                                            '*** dsHeightOff          "Turn off height limit, are you sure?"
Enter Height select Yes                                                         '*** dsHeightYes          "Enter Height select Yes"
Height Limit Too Large Re Enter                                                 '*** dsHeightLarge        "Height Limit Too Large Re Enter"
Move Excavator To MAX Height limit                                              '*** dsMaxHeight          "Move Excavator To MAX Height limit"
Cannot have tandem mode with dig mode                                           '*** dsNoTandem           "Cannot have tandem mode with dig mode"
Press OK to terminate buzzer                                                    '*** dsPressOK            "Press OK to terminate buzzer"
Turn off wall limit, are you sure?                                              '*** dsTurnOffWall        "Turn off wall limit, are you sure?"
CW Limit in degrees                                                             '*** dsCWDeg              "CW Limit in degrees"
CCW Limit in degrees                                                            '*** dsCCWDeg             "CCW Limit in degrees"
Height in Meters                                                                '*** dsHeightM            "Height in Meters"
Dig depth in Meters                                                             '*** dsDepthM             "Dig depth in Meters"
Dig depth must be negative                                                      '*** dsDepthRange         "Dig depth must be negative"
QH is assumed horizontal in front of bucket pin, but with lift at               '*** dsQHRad              "QH is assumed horizontal in front of bucket pin, but with lift at"
Lift only with quick hitch horizontal and in front of bucket pin                '*** dsQHHor              "Lift only with quick hitch horizontal and in front of bucket pin"
New normal dipper option detected                                               '*** dsLongDip            "New normal dipper option detected"
New alt dipper option detected                                                  '*** dsShortDip           "New alt dipper option detected"
Cab protection radius(mm)                                                       '*** dsCabProtectionRadius "Cab protection radius(mm)"
Back Stability Heavy load setting has been set to equal Medium Load setting     '*** dsBackStabHeavyLoad  "Back Stability Heavy load setting has been set to equal Medium Load setting"
Boom must be in central position to set Limit                                   '*** dsZOrOffsetSwingBoomCentral "Boom must be in central position to set Limit"
Tracks Not Retracted, All limits will be disabled                               '*** dsLimitsDisabled     "Tracks Not Retracted, All limits will be disabled"
Tracks Mismatch:  Tracks Must be Fully Retracted or Extended In Rail Duty       '*** dsTracksMismatch     "Tracks Mismatch:  Tracks Must be Fully Retracted or Extended In Rail Duty"
Slew Limits within Stop Margins                                                 '*** dsStopMarginExceedsSlewLimitsWarn "Slew Limits within Stop Margins"
Slew Limits within Slow Margins                                                 '*** dsSlowMarginExceedsSlewLimitsWarn "Slew Limits within Slow Margins"
Reduce load to change lift points                                               '*** dsLOHModeChangeWarn  "Reduce load to change lift points"
Analog Inputs have been reset due to use of SigQuest sensors                    '*** dsAnalogInputsReset  "Analog Inputs have been reset due to use of SigQuest sensors"
The version of Module 2 must be greater than 5.3                                '*** dsIncompatibleModule2 "The version of Module 2 must be greater than 5.3"
Change                                                                          '*** dsChange             "Change"
To                                                                              '*** dsTo                 "To"
Select a wall                                                                   '*** dsSelectAWall        "Select a wall"
Wall Limits are disabled, continue?                                             '*** dsWallLimitsDisabled "Wall Limits are disabled, continue?"
Select left/right wall or mark bucket                                           '*** dsSelectLeftRightWall "Select left/right wall or mark bucket"
Disable Slew Limits?                                                            '*** dsDisableSlewLimits  "Disable Slew Limits?"
Clear Wall settings?                                                            '*** dsClearWallSettings  "Clear Wall settings?"
Disable Slew Limits and Enable Walls?                                           '*** dsDisableSlewEnableWall "Disable Slew Limits and Enable Walls?"
Enable all Wall Limits?                                                         '*** dsEnableAllWalls     "Enable all Wall Limits?"
Disable all Wall Limits?                                                        '*** dsDisableAllWalls    "Disable all Wall Limits?"
Click wall again to activate                                                    '*** dsClickWallAgainToActivate "Click wall again to activate"
Move boom and mark                                                              '*** dsMoveBoomAndMark    "Move boom and mark"
Enter left wall distance (m)                                                    '*** dsEnterLeftWall      "Enter left wall distance (m)"
Enter right wall distance (m)                                                   '*** dsEnterRightWall     "Enter right wall distance (m)"
Wall is too close, cancel?                                                      '*** dsWallIsTooClose     "Wall is too close, cancel?"
Wall is too far                                                                 '*** dsWallIsTooFar       "Wall is too far"
Warning: extended tracks hit wall                                               '*** dsWallHitsTracks     "Warning: extended tracks hit wall"
CAUTION: Slew/Joystick mismatch, cancel to ignore                               '*** dsConfirmSlewDriverJoystickMismatch "CAUTION: Slew/Joystick mismatch, cancel to ignore"
' Legal Disclaimer
This indicator is not certified to work                                         '*** dsLeg1               "This indicator is not certified to work"
This indicator is certified to work                                             '*** dsLeg5               "This indicator is certified to work"
OLE                                                                             '*** dsOLE                "OLE"
under OLE or on ALO.                                                            '*** dsLeg8               "under OLE or on ALO."
Limits can be exceeded if operating at speed.                                   '*** dsLeg9               "Limits can be exceeded if operating at speed."
It is the operator's responsibility to allow for                                '*** dsLeg10              "It is the operator's responsibility to allow for"
attachments and load.                                                           '*** dsLeg11              "attachments and load."
under OLE but not on ALO when in Height Limit.                                  '*** dsLeg12              "under OLE but not on ALO when in Height Limit."
ALO                                                                             '*** dsALO                "ALO"
' Other Messages/words/names
Radius                                                                          '*** dsRadius             "Radius"
Extn                                                                            '*** dsExtn               "Extn"
Bar                                                                             '*** dsBar                "Bar"
Out                                                                             '*** dsOut                "Out"
Cancel                                                                          '*** dsCancel             "Cancel"
Cancel                                                                          '*** dsCancel_English     "Cancel"
YES                                                                             '*** dsYES                "YES"
YES                                                                             '*** dsYES_English        "YES"
NO                                                                              '*** dsNO                 "NO"
NO                                                                              '*** dsNO_English         "NO"
' Information Messages
I1 Counter-wt intermediate!                                                     '*** dsI1                 "I1 Counter-wt intermediate!"
I2 500kg margin applied                                                         '*** dsI2                 "I2 500kg margin applied"
I3 Stub limit!                                                                  '*** dsI3                 "I3 Stub limit!"
I4 Stabilisers not stowed (drive cut)                                           '*** dsI4                 "I4 Stabilisers not stowed (drive cut)"
I5 Engine off!                                                                  '*** dsI5                 "I5 Engine off!"
I6 Rail gear switch!                                                            '*** dsI6                 "I6 Rail gear switch!"
I7 Bad rail gear!                                                               '*** dsI7                 "I7 Bad rail gear!"
I13 Emergency stop!                                                             '*** dsI13                "I13 Emergency stop!"
I14 Air brakes! (drive cut)                                                     '*** dsI14                "I14 Air brakes! (drive cut)"
I15 Menu test tab for screen brightness                                         '*** dsI15                "I15 Menu test tab for screen brightness"
I18 Trailer breakaway!                                                          '*** dsI18                "I18 Trailer breakaway!"
I19 Tracks In/Out mismatch!                                                     '*** dsI19                "I19 Tracks In/Out mismatch!"
I22 Attachment over pressure!                                                   '*** dsI22                "I22 Attachment over pressure!"
I23 Attachment Pressure comms                                                   '*** dsI23                "I23 Attachment Pressure comms"
I26 Max Track Twist Exceeded                                                    '*** dsI26                "I26 Max Track Twist Exceeded"
I27 Load exceeds max. output slowed                                             '*** dsI27                "I27 Load exceeds max. output slowed"
I28 Max. Cant exceeded, output slowed                                           '*** dsI28                "I28 Max. Cant exceeded, output slowed"
I29 Max. Grad exceeded, output slowed                                           '*** dsI29                "I29 Max. Grad exceeded, output slowed"
I30 CAN Comms Errors                                                            '*** dsI30                "I30 CAN Comms Errors"
I34 Hi/Lo Rail Input mismatch                                                   '*** dsI34                "I34 Hi/Lo Rail Input mismatch"
I35 Speed U/C comms error                                                       '*** dsI35                "I35 Speed U/C comms error"
I36 Tandem Lift Interface comms                                                 '*** dsI36                "I36 Tandem Lift Interface comms"
I37 Tandem Lift Interface checksum                                              '*** dsI37                "I37 Tandem Lift Interface checksum"
I38 Paired machine in overload                                                  '*** dsI38                "I38 Paired machine in overload"
I39 Paired machine in motion cut                                                '*** dsI39                "I39 Paired machine in motion cut"
I40 Unpaired machine in motion cut.                                             '*** dsI40                "I40 Unpaired machine in motion cut."
No Errors                                                                       '*** dsNoErrors           "No Errors"
' Error Messages
E2 Offset boom not straight!                                                    '*** dsE2                 "E2 Offset boom not straight!"
E3 Slew not straight!                                                           '*** dsE3                 "E3 Slew not straight!"
E4 Axles not locked!                                                            '*** dsE4                 "E4 Axles not locked!"
E5 Counterweight mismatch!                                                      '*** dsE5                 "E5 Counterweight mismatch!"
E6 Backwards stability!                                                         '*** dsE6                 "E6 Backwards stability!"
E8 Dipper mismatch!                                                             '*** dsE8                 "E8 Dipper mismatch!"
E9 Fore-boom mismatch!                                                          '*** dsE9                 "E9 Fore-boom mismatch!"
E10 Pre-boom mismatch!                                                          '*** dsE10                "E10 Pre-boom mismatch!"
E11 Height mismatch!                                                            '*** dsE11                "E11 Height mismatch!"
E12 Radius mismatch!                                                            '*** dsE12                "E12 Radius mismatch!"
E13 Slew mismatch!                                                              '*** dsE13                "E13 Slew mismatch!"
E14 Safety mismatch!                                                            '*** dsE14                "E14 Safety mismatch!"
E15 Mismatched safety!                                                          '*** dsE15                "E15 Mismatched safety!"
E20 Slew left into limit!                                                       '*** dsE20                "E20 Slew left into limit!"
E21 Slew right into limit!                                                      '*** dsE21                "E21 Slew right into limit!"
E22 Offset mismatch!                                                            '*** dsE22                "E22 Offset mismatch!"
E27 RS dual over pressure!                                                      '*** dsE27                "E27 RS dual over pressure!"
E28 RS dual pressure mismatch!                                                  '*** dsE28                "E28 RS dual pressure mismatch!"
E29 RS dual pressure over 20mA!                                                 '*** dsE29                "E29 RS dual pressure over 20mA!"
E30 RS dual press sensor below 4mA!                                             '*** dsE30                "E30 RS dual press sensor below 4mA!"
E31 RS dual press sensor 0!                                                     '*** dsE31                "E31 RS dual press sensor 0!"
E32 RS dual press sensor 1023!                                                  '*** dsE32                "E32 RS dual press sensor 1023!"
E33 RS over pressure!                                                           '*** dsE33                "E33 RS over pressure!"
E34 RS 20mA press sensor over 20mA!                                             '*** dsE34                "E34 RS 20mA press sensor over 20mA!"
E35 RS press sensor below 4mA!                                                  '*** dsE35                "E35 RS press sensor below 4mA!"
E36 RS press sensor 0!                                                          '*** dsE36                "E36 RS press sensor 0!"
E37 RS dual press sensor 1023!                                                  '*** dsE37                "E37 RS dual press sensor 1023!"
E38 FS dual pressure over 20mA!                                                 '*** dsE38                "E38 FS dual pressure over 20mA!"
E39 FS dual press sensor below 4mA!                                             '*** dsE39                "E39 FS dual press sensor below 4mA!"
E40 FS dual press sensor 1023!                                                  '*** dsE40                "E40 FS dual press sensor 1023!"
E41 FS dual press sensor 0!                                                     '*** dsE41                "E41 FS dual press sensor 0!"
E42 FS dual pressure mismatch!                                                  '*** dsE42                "E42 FS dual pressure mismatch!"
E43 FS dual low pressure!                                                       '*** dsE43                "E43 FS dual low pressure!"
E44 FS dual over pressure!                                                      '*** dsE44                "E44 FS dual over pressure!"
E45 FS 20mA press sensor over 20mA!                                             '*** dsE45                "E45 FS 20mA press sensor over 20mA!"
E46 FS press sensor below 4mA!                                                  '*** dsE46                "E46 FS press sensor below 4mA!"
E47 FS press sensor 1023!                                                       '*** dsE47                "E47 FS press sensor 1023!"
E48 FS press sensor 0!                                                          '*** dsE48                "E48 FS press sensor 0!"
E49 FS low pressure!                                                            '*** dsE49                "E49 FS low pressure!"
E50 FS over pressure!                                                           '*** dsE50                "E50 FS over pressure!"
E57 Boom Ang out of range!                                                      '*** dsE57                "E57 Boom Ang out of range!"
E68 MOD1 Op 9-16 connection!                                                    '*** dsE68                "E68 MOD1 Op 9-16 connection!"
E70 MOD1 Op 1-8 connection!                                                     '*** dsE70                "E70 MOD1 Op 1-8 connection!"
E71 MOD1 Comms!                                                                 '*** dsE71                "E71 MOD1 Comms!"
E72 MOD2 Comms!                                                                 '*** dsE72                "E72 MOD2 Comms!"
E75 MOD5 Comms!                                                                 '*** dsE75                "E75 MOD5 Comms!"
E77 MOD9 Comms!                                                                 '*** dsE77                "E77 MOD9 Comms!"
E78 MOD11 Comms!                                                                '*** dsE78                "E78 MOD11 Comms!"
E81 alt/jib #4 Errors!!                                                         '*** dsE81                "E81 alt/jib #4 Errors!!"
E82 Safety alt/jib #8 Errors!                                                   '*** dsE82                "E82 Safety alt/jib #8 Errors!"
E83 Safety dipper #7 Errors!                                                    '*** dsE83                "E83 Safety dipper #7 Errors!"
E84 Safety fore #6 Errors!                                                      '*** dsE84                "E84 Safety fore #6 Errors!"
E85 Safety stub #5 Errors!                                                      '*** dsE85                "E85 Safety stub #5 Errors! "
E86 Offset Errors!                                                              '*** dsE86                "E86 Offset Errors!"
E87 Dipper #3 Errors!                                                           '*** dsE87                "E87 Dipper #3 Errors!"
E88 Fore #2 Errors!                                                             '*** dsE88                "E88 Fore #2 Errors!"
E89 Stub #1 Errors!                                                             '*** dsE89                "E89 Stub #1 Errors! "
E90 Encoder Sensor Comms!                                                       '*** dsE90                "E90 Encoder Sensor Comms!"
E92 Safety offset Comms!                                                        '*** dsE92                "E92 Safety offset Comms!"
E93 Safety dipper #7 Comms!                                                     '*** dsE93                "E93 Safety dipper #7 Comms!"
E94 Safety fore #6 Comms!                                                       '*** dsE94                "E94 Safety fore #6 Comms!"
E95 Safety stub #5 Comms!                                                       '*** dsE95                "E95 Safety stub #5 Comms!"
E96 Offset Comms!                                                               '*** dsE96                "E96 Offset Comms!"
E97 Dipper #3 Comms!                                                            '*** dsE97                "E97 Dipper #3 Comms!"
E98 Fore #2 Comms!                                                              '*** dsE98                "E98 Fore #2 Comms!"
E99 Stub #1 Comms!                                                              '*** dsE99                "E99 Stub #1 Comms!"
E104 alt/jib Sensor Comms!                                                      '*** dsE104               "E104 alt/jib Sensor Comms!"
E105 Unlock feedback mismatch!                                                  '*** dsE105               "E105 Unlock feedback mismatch!"
E106 PLC Comms lost x5!                                                         '*** dsE106               "E106 PLC Comms lost x5!"
E107 Under Carriage Comms!                                                      '*** dsE107               "E107 Under Carriage Comms!"
E109 U/C dual CG mismatch!                                                      '*** dsE109               "E109 U/C dual CG mismatch!"
E110 U/C dual CG safety comms!                                                  '*** dsE110               "E110 U/C dual CG safety comms!"
E111 No serial/CAN comms!                                                       '*** dsE111               "E111 No serial/CAN comms!"
E114 No safety comms!                                                           '*** dsE114               "E114 No safety comms!"
E120 MOD2 Op 9-16 connection!                                                   '*** dsE120               "E120 MOD2 Op 9-16 connection!"
E122 MOD2 Op 1-8 connection!                                                    '*** dsE122               "E122 MOD2 Op 1-8 connection!"
E124 Dipper Reeler Comms!                                                       '*** dsE124               "E124 Dipper Reeler Comms!"
E125 Jib Reeler Comms!                                                          '*** dsE125               "E125 Jib Reeler Comms!"
E127 Dipper reeler out of range!                                                '*** dsE127               "E127 Dipper reeler out of range!"
E128 Dual swivel fault!                                                         '*** dsE128               "E128 Dual swivel fault!"
E129 Attachment press sensor                                                    '*** dsE129               "E129 Attachment press sensor"
E132 Z-Boom Invalid inputs!                                                     '*** dsE132               "E132 Z-Boom Invalid inputs!"
E133 Jib reeler out of range!                                                   '*** dsE133               "E133 Jib reeler out of range!"
E134 System Failure during Updates!                                             '*** dsE134               "E134 System Failure during Updates!"
E135 Front Track Twist Cant comms error!                                        '*** dsE135               "E135 Front Track Twist Cant comms error!"
E136 Rear Track Twist Cant comms error!                                         '*** dsE136               "E136 Rear Track Twist Cant comms error!"
E138 Front Track Twist Mismatch!                                                '*** dsE138               "E138 Front Track Twist Mismatch!"
E139 Rear Track Twist Mismatch!                                                 '*** dsE139               "E139 Rear Track Twist Mismatch!"
E140 Cant out of range!                                                         '*** dsE140               "E140 Cant out of range!"
E141 Grad out of range!                                                         '*** dsE141               "E141 Grad out of range!"
E142 Front Track Twist Cant range!                                              '*** dsE142               "E142 Front Track Twist Cant range!"
E143 Rear Track Twist Cant range!                                               '*** dsE143               "E143 Rear Track Twist Cant range!"
E144 Speed Control Module Fault!                                                '*** dsE144               "E144 Speed Control Module Fault!"
E145 Slew Teeth Error!                                                          '*** dsE145               "E145 Slew Teeth Error!"
E146 Slew Teeth comms!                                                          '*** dsE146               "E146 Slew Teeth comms!"
E147 Encoder Sensor Error!                                                      '*** dsE147               "E147 Encoder Sensor Error!"
E148 Safety Slew Teeth Error!                                                   '*** dsE148               "E148 Safety Slew Teeth Error!"
E149 Safety Slew Teeth comms!                                                   '*** dsE149               "E149 Safety Slew Teeth comms!"
E150 Front Track Twist Cant Error!                                              '*** dsE150               "E150 Front Track Twist Cant Error!"
E151 Rear Track Twist Cant Error!                                               '*** dsE151               "E151 Rear Track Twist Cant Error!"
E152 Cant/Grad Error!                                                           '*** dsE152               "E152 Cant/Grad Error!"
E153 Safety Cant/Grad Error!                                                    '*** dsE153               "E153 Safety Cant/Grad Error!"
E154 Cant/Grad comms!                                                           '*** dsE154               "E154 Cant/Grad comms!"
E155 Dual Pressure comms!                                                       '*** dsE155               "E155 Dual Pressure comms!"
E156 Incorrect Tipping files.                                                   '*** dsE156               "E156 Incorrect Tipping files."
E157 Slew Verification must be run successfully.                                '*** dsE157               "E157 Slew Verification must be run successfully."
E158 Safety System not checked.                                                 '*** dsE158               "E158 Safety System not checked."
E159 Remote Kill Switch Fault.                                                  '*** dsE159               "E159 Remote Kill Switch Fault."
E160 EH Controller Comms!                                                       '*** dsE160               "E160 EH Controller Comms!"
E161 EH Controller Mismatch!                                                    '*** dsE161               "E161 EH Controller Mismatch!"
E162 EH Controller Keyswitch!                                                   '*** dsE162               "E162 EH Controller Keyswitch!"
E163 EH Controller Tab Gains!                                                   '*** dsE163               "E163 EH Controller Tab Gains!"
E164 EH Controller Joystick Left!                                               '*** dsE164               "E164 EH Controller Joystick Left!"
E165 EH Controller Joystick Right!                                              '*** dsE165               "E165 EH Controller Joystick Right!"
E166 Joystick slew mismatch!                                                    '*** dsE166               "E166 Joystick slew mismatch!"
E167 Driver tag not received!                                                   '*** dsE167               "E167 Driver tag not received!"
E168 Too many tags at startup!                                                  '*** dsE168               "E168 Too many tags at startup!"
E169 Driver tag not acknowledged!                                               '*** dsE169               "E169 Driver tag not acknowledged!"
E170 PWS Base Station timeout!                                                  '*** dsE170               "E170 PWS Base Station timeout!"
connection!                                                                     '*** dsConnection         "connection!"
Op                                                                              '*** dsOp                 "Op"
